Tank waterproofing in Bangalore with warranty 8073971969
Sump tank waterproofing :
1. Surface Cleaning and Preparation
Clean the tank thoroughly to remove dust, dirt, grease, and any loose particles.
Ensure the surface is free of oil, laitance, or any contaminants that may hinder bonding.
2. Joint Treatment
Use a machine to groove all joints and cracks to create a V-shaped channel.
Fill the prepared grooves with Fosroc Conbextra GP2, a non-shrink grout, to seal gaps effectively.
3. Side Joint Hatching
Apply a bonding coat using SBR chemical (Styrene-Butadiene Rubber) on side joints and other critical areas for enhanced adhesion and flexibility.
4. Waterproofing Chemical Coating
Apply two coats of Fosroc Brushbond waterproofing system:
1. Mix the Brushbond as per manufacturer instructions.
2. Apply the first coat evenly using a brush or roller.
3. Allow it to cure as per the recommended time (usually 4-6 hours).
4. Apply the second coat perpendicular to the first for full coverage.
5. Protection Plaster
After the waterproofing coating has cured, apply two layers of plaster:
First Coat: A rough plaster coat for strength and durability.
Second Coat: A smooth plaster coat for a clean and polished finish.
6. Warranty
Ensure the application adheres to the product guidelines and curing times for durability.
Provide a 10-year warranty for the waterproofing treatment, covering seepage and leakage issues under proper usage conditions.
8073971969
9901741694
Comments
Post a Comment